The 7490 has some problems and I try to fix this problem, we have courses here in this school and we need a router that allows you to connect IOS, Huawei, Ipads etc. AVM reported the problem that it was present in the 7490 that IOS etc could not hook into the wireless network.
I'm looking for a new router box that allows all types of mobile phones, computers, printers, etc. Can connect. Do you have a suggestion?
I'm currently looking out for the router FritzBox! 7590
Does anyone of you have this router and can report me a report?
My 7490 does not cause any problems at all, that will probably be almost all si.
Did you reset the Fritz box times to factory settings?
Actually, the 7490 can connect to all devices. Also with iOS devices.
Well we do courses with us are connected over 200 computers in the LAN and then when a course is from 12 people only 3 people in the wireless with their mobile phone
Problem:
Since the update to the laboratory version, individual WLAN devices can no longer log on.
Problem:
Since the update to the laboratory version, individual WLAN devices can no longer log on.
And the problem has been going on for a long time. We called AVM at the time and said that they had not found a fake fix for the router
Over 200 computers? Is the DHCP range full? Did you do the reset maö?
You should think about a change of hardware for home users to correct solutions for so many users that is appropriate for so many participants.
Be it Ubiquiti, Cisco or similar.
Why are you on the lab version?
A friend has the Fritzbox without problems. All devices from different manufacturers connect easily.
As I said, check DHCP address space on many devices.
Is the network displayed on all devices?
At which connection step does it break off?
Can some devices always connect or is it more changeable when which device works?
Has the FritzBox logged a connection attempt?
Are channels used that are as free as possible? (Can display the FritzBox)
Are 2.4 and 5GHz both used?
The computers all work but some phones can't connect. We do not have the LaborVersion the problem is already known AVM 1-2 years.
And the AVM still have not brought out a hotfix where fix this connection error
So the range is not full. But the problem is said at AVM for years known that some phones can't connect to the wireless
So you really take the FritzBox as a router for +200 devices? Normally a FritzBox assigns only ~ 180 addresses with DHCP. Maximum configured differently 253
Are you on lab version or not? Above is something else than below.
We're not.
There are a maximum of 60 active and +200 were already registered
So now I have in the vicinity of various fries, from the 7390 on 7430 and 7490th In no single I've had the problem described by you so far. Granted this number of devices, I had not even on a Fritzbox but that is not really synonymous designed.
Currently I have on the 7490 in 2.4GHz network 4 devices, in the 5GHz network 5 devices and via cable about 15 machines as VM and physical without a single connection problem.
The Fritzbox is a home device and not designed for something you do as synonymous if it works so halfway.
As already suggested puts you on the hardware that can, with Ubiquity, I'm now not so firm as to be able to specifically suggest devices for this workload. For Cisco, I would suggest a device from the 800 series (891) because then you could also create class VLANS etc, but the device has no Wi-Fi because it would need extra APs, only the devices should only set up the knows what he is doing there
